🔑 AIR Hybrid 3 [iLok]

DUAL FILTERING & SATURATION MODES
Hybrid 3.0 features two multi-mode filters that can run in series or in parallel. In addition, the filters can be assigned one per channel to the stereo outputs, or set so that Oscillator 1 feeds Filter 1, with the remaining Oscillators being routed to Filter 2. Both of the filters offer your choice of DCF (Digitally Controlled Filter) or VCF models. The vintage Voltage Controlled Filter (VCF) makes it easier than ever to achieve those fat, retro synth sounds of the ’70s and ’80s. This sound filter brings the legendary soft and fat warmth of classic analog synth hardware filters to Hybrid 3.0

Use the revolutionary multimode filters to control the tone color of a part by removing or accenting certain frequencies. Choose from an extensive collection of 23 modes. Then dial in the filter cut-off, velocity, and key tracking. Use the resonance dial to change the tone from a nasal sound to a ringing tone by emphasizing frequencies around the cut-off and generating self-oscillation. A blend of the third oscillator and noise generator can serve as an audio modulation source for filter cut-off, producing distinctive electronic audio effects

To add some serious edge, adjust the filter saturation. Hybrid 3.0 offers the original Overdrive filter, which creates a soft tube-like clipping and includes five additional filter saturation modes: Distort, which creates a harder, brighter clipping; Hard Clip, which creates a very hard and bright transistor-like clipping; Rectify, which creates a gentle distortion that retains the character of the input signal; Bit Crush, which creates deliberate aliasing by reducing the bit depth; and Resample, which creates deliberate aliasing by reducing the sample rate

LFOs
Hybrid 3.0 includes four LFOs per part: two monophonic, one polyphonic, and one special Pump LFO. Use the LFOs to modulate pitch, loudness, or cut-off to produce vibrato, tremolo, or electronic sweeps. Choose from eight modulation types, ranging from sine and triangle waves to random, “drift,” and sample-and-hold modulation. Change the depth, rate, phase, and sync mode to quickly and dramatically alter the sound

Pump is a special type of envelope that simulates studio side-chaining to create the pumping-and-breathing effect. In the case of Hybrid 3.0, this rhythmic effect can be applied to much more than the overall mix. The Pump LFO can be routed to create a rhythmic effect on a variety of specific parameters, such as pitch or filter settings

ENVELOPE EDITORS
Use the four envelope editors to easily sculpt the filter, amplitude, and any two other modulation envelopes. Adjust velocity, attack, decay, and key tracking, and then type in the envelope rate

HYPE ALGORITHM
New to Hybrid 3.0 is Hype, a quick way of enhancing the low- or high- end of any patch. Beef up wobbles, basses, and kick-drum sounds with deep, sub-bass by adjusting the Hype Low parameter, or turn up Hype High to polish off the high end with shimmer and sparkle; the latter sounds great on pads, strings, brass, and percussive sounds

DOUBLING
Hybrid 3.0 offers a new way of making your patches sound enormous. Two Doubling knobs, one for each part, are built into the Common tab for additional widening and thickening. Turn up the Doubling knobs to full for a dramatic response or mix it in subtly for a slight thickening effect

PERFORMANCE-ORIENTED FEATURES
Whether you use it in the studio or in a live situation, Hybrid 3.0 is built to perform. Use the step sequencers for arpeggiation or phrase generation. Set the modulation matrix to easily map modulations from sources to destinations. And set up “morph” groups to modify sounds on the fly, from the interface or a MIDI controller